 |
|
|
| |
|
| |
|
The Iceman chillers have been engineered for increased efficiency, with additional features in a compact, cost-effective package. Each Iceman features non-ferrous components, in both the refrigeration and fluid handling circuits, that reduce maintenance concerns and downtime. The stainless steel supply pump and evaporator are highly efficient and long lasting for continuous process usage. The heavy duty insulated plastic tank, combined with non-ferrous plumbing, give you a system that is virtually maintenance free.
|
| |
|
| Model |
Cooling
Capacity
(Tons) 1 |
Compressor
Horsepower
(Hp) |
Pump
Horsepower
(Hp) |
Nominal
Flow Rate
(GPM) |
Nominal
Pressure
(PSI) |
Process
Connection
(FNPT) |
Tank
Size
(Gal.) |
Dimensions
L x W x H |
Shipping
Weight
(approx. lbs.) |
| AC-.5* |
1/2 |
1/2 |
3/4 |
1.2 |
35 |
1" |
10 |
36" x 25" x 38" |
300 |
| AC-1* |
1 |
1 |
3/4 |
2.4 |
35 |
1" |
10 |
36" x 25" x 38" |
330 |
| AC-1.5* |
1.5 |
1.5 |
3/4 |
3.6 |
35 |
1" |
15 |
48" x 28" x 39" |
425 |
| AS-2** |
2 |
2 |
3/4 |
4.8 |
35 |
1" |
15 |
48" x 28" x 39" |
450 |
| AS-3** |
3 |
3 |
3/4 |
7.2 |
35 |
1" |
15 |
48" x 28" x 39" |
460 |
| AS-5** |
5 |
5 |
1 |
12 |
40 |
1-1/2" |
20 |
56" x 37" x 45" |
565 |
| AS-7.5** |
7.5 |
7.5 |
1 |
18 |
40 |
1-1/2" |
20 |
56" x 37" x 45" |
840 |
| AS-10** |
10 |
10 |
1.5 |
24 |
45 |
1-1/2" |
20 |
56" x 37" x 45" |
860 |
| AS-15** |
15 |
15 |
3 |
36 |
40 |
1-1/2" |
68 |
78" x 40" x 65" |
1650 |
| AS-20** |
20 |
20 |
3 |
48 |
40 |
1-1/2" |
68 |
78" x 40" x 65" |
1850 |
| AS-25** |
25 |
25 |
5 |
60 |
55 |
2" |
68 |
140" x 50" x 80" |
3775 |
| AC-30* |
30 |
30 |
7.5 |
72 |
60 |
2" |
100 |
140" x 50" x 80" |
3860 |
| AC-35* |
35 |
35 |
7.5 |
84 |
60 |
2" |
100 |
140" x 50" x 80" |
4200 |
| AS-40** |
20/20 |
20/20 |
7.5 |
96 |
up to 50 |
3" |
100 |
190" x 52" x 85" |
3995 |
|
| |
|
|
| |
|
1 Based on 50°F chilled water at 2.4 gpm/Ton and 90°F ambient air.
* Standard compressor on 0.5-1.5 Ton is reciprocating type and 30-35 Ton is semi-hermetic type.
These models are not available in the scroll compressor.
** Standard compressor is scroll type, however 2-10 Ton also available in reciprocating and 15-20
Ton also available in semi-hermetic type. Please consult factory for more information.
----------------------------------------------------------------------------------------------------
Fluid temperature range is 20 to 70°F for reciprocating compressors and 20 to 65°F
for scroll and semi-hermetic compressors.
1 Ton = 12,000 BTU's per hour
Available in a variety of voltages. Please consult factory for more information.
|
| |
|
| Model |
Cooling
Capacity
(Tons) 1 |
Compressor
Horsepower
(Hp) |
Pump
Horsepower
(Hp) |
Nominal
Flow Rate
(GPM) |
Nominal
Pressure
(PSI) |
Connections
(FNPT)
Process |
Connections
(FNPT)
Condenser |
Tank
Size
(Gal.) |
Dimensions
L x W x H |
Shipping
Weight
(approx. lbs.) |
| WC-.5* |
1/2 |
1/2 |
3/4 |
1.2 |
35 |
1" |
1/2" |
10 |
36" x 25" x 38" |
320 |
| WC-1* |
1 |
1 |
3/4 |
2.4 |
35 |
1" |
1/2" |
10 |
36" x 25" x 38" |
350 |
| WC-1.5* |
1.5 |
1.5 |
3/4 |
3.6 |
35 |
1" |
1/2" |
15 |
36" x 25" x 38" |
400 |
| WS-2** |
2 |
2 |
3/4 |
4.8 |
35 |
1" |
1/2" |
15 |
36" x 25" x 38" |
410 |
| WS-3** |
3 |
3 |
3/4 |
7.2 |
35 |
1" |
1/2" |
15 |
36" x 25" x 38" |
430 |
| WS-5** |
5 |
5 |
1 |
12 |
40 |
1-1/2" |
1" |
20 |
48" x 28" x 39" |
515 |
| WS-7.5** |
7.5 |
7.5 |
1 |
18 |
40 |
1-1/2" |
1-1/2" |
20 |
56" x 37" x 45" |
790 |
| WS-10** |
10 |
10 |
1.5 |
24 |
45 |
1-1/2" |
1-1/2" |
20 |
56" x 37" x 45" |
810 |
| WS-15** |
15 |
15 |
3 |
36 |
40 |
1-1/2" |
1-1/2" |
68 |
80" x 38" x 45" |
1575 |
| WS-20** |
20 |
20 |
3 |
48 |
40 |
1-1/2" |
1-1/2" |
68 |
80" x 38" x 45" |
1775 |
| WS-25** |
25 |
25 |
5 |
60 |
55 |
2" |
2" |
68 |
140" x 50" x 50" |
3675 |
| WC-30* |
30 |
30 |
7.5 |
72 |
60 |
2" |
2" |
100 |
140" x 50" x 50" |
3760 |
| WC-35* |
35 |
35 |
7.5 |
84 |
60 |
2" |
2" |
100 |
140" x 50" x 50" |
4100 |
| WS-40** |
20/20 |
20/20 |
7.5 |
96 |
up to 50 |
3" |
1.5" |
100 |
190" x 52" x 55" |
3330 |
|
| |
|
1 Based on 50°F chilled water at 2.4 GPM/Ton and 85°F condensing water.
* Standard compressor on 0.5-1.5 Ton is reciprocating type and 30-35 Ton is semi-hermetic type.
These models are not available in the scroll compressor.
** Standard compressor is scroll type, however 2-10 Ton also available in reciprocating and 15-20
Ton also available in semi-hermetic type. Please consult factory for more information.
----------------------------------------------------------------------------------------------------
Fluid temperature range is 20 to 70°F for reciprocating compressors and 20 to 65°F
for scroll and semi-hermetic compressors.
1 Ton = 12,000 BTU's per hour
Available in a variety of voltages. Please consult factory for more information.
|
|
 |
|
 |
| Standard Features |
| A• |
Stainless steel centrifugal supply pump |
|
| B• |
Heavy-duty insulated plastic tank |
|
| C• |
Insulated non-ferrous plumbing and components |
|
| D• |
Air cooled condenser |
|
| E• |
Hermetically sealed compressors (small models) Semi-hermetically sealed compressors (larger models) |
|
| F• |
Highly efficient brazed plate evaporator |
|
| G• |
Microprocessor based controller mounted in operator-friendly orientation |
|
| H• |
Hot gas bypass standard (cylinder unloading for 15 & 20 Ton) |
|
| I• |
NEMA rated electrical enclosure with safety door disconnect switch |
|
| J• |
NFPA 79 and UL labeled electrical sub-panel (not shown) |
|
| |
|
|
| |
TYPICAL FLOW SCHEMATIC |
|
| |
|
|
 |
|
| |
| |
|
|
| * Please consult factory for more information. |
|
|
| • |
Air duct flange (top) 1/2 ton to 40 ton cabinet |
| • |
Audible alarm |
| • |
Auto fill |
| • |
Blown fuse indication |
| • |
CPR valve |
| • |
Custom controls |
| • |
Flow meters |
| • |
Low water level indication |
| • |
Low/High refrigerant gauges & thermometer (standard on 1/2 to 40 ton) |
| • |
Other voltages, phases, frequencies |
| • |
Phase indicator |
| • |
Pilot light indication (standard on 1/2 to 40 ton) |
| • |
Power cord |
| • |
Process purge (manual & automatic) |
| • |
Pump modifications to increase flow capacity or elimination of supply pump |
| • |
Remote condenser |
| • |
Special paint |
| • |
Strainers (process return) |
| • |
Tank upgrades and modifications |
| • |
TEFC motors |
| • |
Valved process bypass |
| • |
Visual alarm |
|
| |
| Features of Standard and Optional Controls |
A variety of controls are available from Mokon to enhance the high performance of our systems. From solid state to microprocessor based, with communication capabilities to PLC type controls, Mokon can provide the type of control package right for your process.
|
| Eurotherm 3216 Series |
The Eurotherm 1/16 DIN (3216) microprocessor controller is now standard on the entire line of portable chillers, water and heat transfer fluid temperature control systems. This controller is operator friendly and easy-to-use. Standard features include a microprocessor PID controller for the highest accuracy in temperature control, a dual LCD display that shows set point and actual fluid temperature, and advanced PID overshoot protection with self-tuning capabilities for increased accuracy. Scrolling text messages deliver plain language messages to let users know exactly what is happening to the process.
There are optional 1/8 or 1/4 DIN controllers available, with high/low deviation alarm, remote set point and retransmission and serial communication. A five-year warranty comes standard with the controller. |
 |
|
| Custom Controls |
| Mokon’s ability to meet customers’ specific requirements is seen not only in custom system designs, but also in controls. Our engineers can custom design a control package that meets your specific processing needs, from brand name controls, to direct computer/host machine interfacing. All of which can be expected with the same quality and durability that our customers expect from our complete line of temperature control systems. |
|
| |