 |
|
|
| |
|
| |
|
Mokon's HTF 500 Series systems are available up to 500°F (260°C) with a flow rate of either 10 GPM or 20 GPM to the process. These systems feature the latest control technology, unique design philosophies, and unmatched electrical/safety standards to ensure precise process fluid temperature control.
Both models are offered in single, dual, and triple zone configurations with varying heating capacities to match your process temperature control applications.
For a Recommended Heat Transfer Fluid List, click on this link.
|
| |
|
| Hp |
Flow Rate & Pressure |
Connections |
# of Zones |
Heating Capacity
kW per Zone
(total kW) |
Reservoir
Tank
Volume
(gallons) |
Cabinet
Dimensions
L x W x H
(inches) |
| 1 |
10 GPM and
up to 60 psi |
3/4" process
and water |
1 |
6 or 12 |
18 |
41 x 15 x 50 |
| 1 |
10 GPM and
up to 60 psi |
3/4" process
and water |
1 |
18 or 24 |
18 |
41 x 15 x 61 |
| 1 |
10 GPM and
up to 60 psi |
3/4" process
and water |
1 |
30 or 36 |
38 |
41 x 30 x 51 |
| 1 |
10 GPM and
up to 60 psi |
3/4" process
and water |
2 |
6(12) or 12(24) |
38 |
41 x 30 x 51 |
| 1 |
10 GPM and
up to 60 psi |
3/4" process
and water |
2 |
18(36) or 24(48) |
38 |
41 x 30 x 62 |
| 1 |
10 GPM and
up to 60 psi |
3/4" process
and water |
3 |
6(18) or 12(36) |
58 |
41 x 45 x 51 |
| 1 |
10 GPM and
up to 60 psi |
3/4" process
and water |
3 |
18(54) or 24(72) |
58 |
41 x 45 x 62 |
| 2 |
20 GPM and
up to 100 psi |
1" process
3/4" water |
1 |
6 or 12 |
18 |
41 x 15 x 50 |
| 2 |
20 GPM and
up to 100 psi |
1" process
3/4" water |
1 |
18 or 24 |
18 |
41 x 15 x 61 |
| 2 |
20 GPM and
up to 100 psi |
1" process
3/4" water |
1 |
30 or 36 |
38 |
41 x 30 x 51 |
| 2 |
20 GPM and
up to 100 psi |
1" process
3/4" water |
1 |
48 |
38 |
41 x 30 x 62 |
| 2 |
20 GPM and
up to 100 psi |
1" process
3/4" water |
2 |
6(12) or 12(24) |
38 |
41 x 30 x 51 |
| 2 |
20 GPM and
up to 100 psi |
1" process
3/4" water |
2 |
18(36) or 24(48) |
38 |
41 x 30 x 62 |
| 2 |
20 GPM and
up to 100 psi |
1" process
3/4" water |
2 |
30(60) or 36(72) |
58 |
41 x 45 x 62 |
| 2 |
20 GPM and
up to 100 psi |
1" process
3/4" water |
3 |
6(18) or 12(36) |
58 |
41 x 45 x 51 |
| 2 |
20 GPM and
up to 100 psi |
1" process
3/4" water |
3 |
18(54) or 24(72) |
58 |
41 x 45 x 62 |
|
| |
|
|
| |
|
Higher kW capacities and a variety of voltages are available. Please consult factory.
|
|
 |
|
 |
| Standard Features |
|
The HTF 500 Series features Mokon's proven unique heating philosophy and cool oil reservoir design, giving your process accurate temperature control. The small heater manifold ensures a small hold-up volume of fluid within the process loop for more efficient heating and faster response for process temperature control. The individual heater orientation and manifold design allow the oil to flow in a serpentine pattern to increase the heat transfer rate and reduce the film temperature of the fluid on the heaters, resulting in longer heater and fluid life.
The "cool oil reservoir," a Mokon trademark, has been enhanced by the incorporation of a new "continuous flow" heat exchanger immersed within the reservoir. The fluid is cooled by forcing the released process oil through a "continuous flow" heat exchanger where it is mixed with a continuous flow of cool oil from the reservoir. This new design offers the safest and most efficient means of cooling available without the concern of "thermal shock" common in competitive systems with in-line cooling capabilities.
Typical Flow Schematic
|
 |
| |
|
|
| |
|
|
| * Please consult factory for more information. |
|
|
| • |
Additional Cooling Capacity |
| • |
Alarms |
| • |
Auto Air Purge |
| • |
Blown Fuse Indication |
| • |
Control Options |
| • |
Heat Exchanger Flow Control System |
| • |
Heater Selector Switch (Automatic) |
| • |
Heater Selector Switch (Manual) |
| • |
High-Temperature Stainless Steel Braided Hose |
| • |
Low Fluid Level Shut-Off |
| • |
Other Voltages, Phases, Frequencies |
| • |
Phase Indicator |
| • |
Process Fluid Purge via Switch |
| • |
Strainers |
| • |
Thermometers |
| |
|
| |
|
|
| |
| |
| Features of Standard and Optional Controls |
A variety of controls are available from Mokon to enhance the high performance of our systems. From solid state to microprocessor based, with communication capabilities to PLC type controls, Mokon can provide the type of control package right for your process.
|
| Eurotherm 3216 Series |
The Eurotherm 1/16 DIN (3216) microprocessor controller is now standard on the entire line of portable chillers, water and heat transfer fluid temperature control systems. This controller is operator friendly and easy-to-use. Standard features include a microprocessor PID controller for the highest accuracy in temperature control, a dual LCD display that shows set point and actual fluid temperature, and advanced PID overshoot protection with self-tuning capabilities for increased accuracy. Scrolling text messages deliver plain language messages to let users know exactly what is happening to the process.
There are optional 1/8 or 1/4 DIN controllers available, with high/low deviation alarm, remote set point and retransmission and serial communication. A five-year warranty comes standard with the controller. |
 |
|
| Custom Controls |
| Mokon’s ability to meet customers’ specific requirements is seen not only in custom system designs, but also in controls. Our engineers can custom design a control package that meets your specific processing needs, from brand name controls, to direct computer/host machine interfacing. All of which can be expected with the same quality and durability that our customers expect from our complete line of temperature control systems. |
|
| |