 |
|
|
| |
|
The Mokon Minitherm water system is designed to surpass today’s safety standards, while providing accurate control of your process temperature. The Minitherm's compact package fits into tight spaces and reduces floor space requirements.
The system is available in 10 GPM pumping capacity and heating capacities of 2 or 4 kW, for operation up to 250°F (121°C). Each Mokon Minitherm is equipped with a microprocessor-based PID control as standard to assure accurate control. This portable eighty-pound system is ideal for small tonnage molding machine and lab applications.
|
| Model |
Pump |
Flow Rate
& Pressure |
Heating
Capacity (kW) |
Total Amps
460V, 3 PH |
Total Amps
230V, 3PH |
Process
Connection |
Drain/Supply
Connection |
Dimensions
L x W x H |
Shipping
Weight |
| MT |
1/3 hp |
10 GPM up
to 20 PSI |
2 |
6 |
9 |
1/2" NPT |
1/2" NPT |
18" x 13 1/2" x 15 1/4" |
80 lbs |
| MT |
1/3 hp |
10 GPM up
to 20 PSI |
4 |
9 |
16 |
1/2" NPT |
1/2" NPT |
18" x 13 1/2" x 15 1/4" |
80 lbs |
|
| |
| Note: Other kW capacities and voltages are available. Consult factory |
|
 |
 |
| Standard Features |
| A. |
Pressure gauges |
| B. |
Microprocessor based PID controller |
| C. |
Pressure relief valve |
| D. |
High temperature safety shut-off switch |
| E. |
Copper piping |
| F. |
Brass heating manifold with copper heaters |
| G. |
Solenoid cooling valve |
| H. |
Cast brass fluid connections securely mounted to cabinet |
| I. |
Low pressure safety shut-off switch |
| J. |
Cast iron centrifugal pump with stainless steel impeller, for temperatures up to 250°F (121°C) |
| K. |
Automatic air purge (not shown) |
| L. |
10' power cord (not shown) |
| M. |
NFPA 79 and UL labeled electrical sub-panel (not shown) |
|
|
The Mokon Minitherm provides an economical circulating water temperature control system for your small tonnage molding machine, prototype and lab applications. Although small in size, the Mokon Minitherm is big in accuracy and reliability, like all of our Mokon systems.
|
|
| * Please consult factory for more information. |
|
|
| • |
Alarms |
| • |
All brass pump |
| • |
Closed water circuitry |
| • |
Control options |
| • |
Cooling or chilled circuits |
| • |
Door disconnect switch |
| • |
Emergency "crash" cooling control |
| • |
Flo-director |
| • |
Heat exchangers |
| • |
Heat remover design |
| • |
High/low heater operation (manual or automatic) |
| • |
Manifolds |
| • |
Modulating valves |
| • |
NEMA 4,12, and hazardous area ratings |
| • |
Other voltages, phases, frequencies |
| • |
Pressure regulators |
| • |
Solid state contactors/relays |
| • |
Stainless steel cabinets and components |
| • |
Tanks |
| • |
T.E.F.C. motor |
|
| * Other options available — see literature or consult factory for more information. |
| |
| Features of Standard and Optional Controls |
A variety of controls are available from Mokon to enhance the high performance of our systems. From solid state to microprocessor based, with communication capabilities to PLC type controls, Mokon can provide the type of control package right for your process.
|
| Eurotherm 3216 Series |
The Eurotherm 1/16 DIN (3216) microprocessor controller is now standard on the entire line of portable chillers, water and heat transfer fluid temperature control systems. This controller is operator friendly and easy-to-use. Standard features include a microprocessor PID controller for the highest accuracy in temperature control, a dual LCD display that shows set point and actual fluid temperature, and advanced PID overshoot protection with self-tuning capabilities for increased accuracy. Scrolling text messages deliver plain language messages to let users know exactly what is happening to the process.
There are optional 1/8 or 1/4 DIN controllers available, with high/low deviation alarm, remote set point and retransmission and serial communication. A five-year warranty comes standard with the controller. |
 |
|
| Custom Controls |
| Mokon’s ability to meet customers’ specific requirements is seen not only in custom system designs, but also in controls. Our engineers can custom design a control package that meets your specific processing needs, from brand name controls, to direct computer/host machine interfacing. All of which can be expected with the same quality and durability that our customers expect from our complete line of temperature control systems. |
|
| |