 |
|
|
| |
|
This vertical design provides two independent zones of control from one location without increasing the amount of floor space required for operation.
The Dual Zone Duratherm is built with an advanced heating canister design and nonferrous materials of construction, a stainless steel pump for long life and durability, as well as fewer piping connections to promote leak free operation.
|
| Model |
Pump
(hp) |
Flow Rate & Pressure |
Heating
Capacity
(kW) |
Process
Connection |
Drain/Supply
Connection |
Approximate
Dimensions
L x W x H |
Approximate
Shipping
Weight |
| DZ |
¾ |
25 GPM @ 25 PSI |
9-18-24 |
1" |
1" |
33" x 17" x 52" |
300 lbs. |
| DY |
1 ½ |
40 GPM @ 32 PSI |
9-18-24 |
1 ½" |
1" |
33" x 17" x 52" |
320 lbs. |
| DW |
3 |
60 GPM @ 34 PSI |
9-18-24 |
1 ½" |
1" |
33" x 17" x 52" |
340 lbs. |
| DU |
5 |
80 GPM @ 38 PSI |
9-18-24 |
1 ½" |
1" |
33" x 17" x 52" |
360 lbs. |
| DV |
7 1/2 |
100 GPM @ 40 PSI |
9-18-24 |
2" |
1" |
33" x 17" x 52" |
490 lbs. |
| DX |
10 |
120 GPM @ 35 PSI |
9-18-24 |
2" |
1" |
39" x 17" x 52" |
590 lbs. |
|
| |
| Available in a variety of voltages. Consult factory. |
|
*Shown in single zone configuration. |
|
 |
Standard Features |
| A• |
Microprocessor-based controller in easily accessible panel |
| B• |
Fluid high temperature safety shut-off switch |
| C• |
Pressure relief valve |
| D• |
Horizontal brass or stainless steel heater canister with unique turbulent flow diverter |
| E• |
Cast brass fluid connections securely mounted to cabinet |
| F• |
Solenoid cooling valve |
| G• |
Removable panel for easy access to heater element (not shown) |
| H• |
Low pressure safety shut-off switch |
| I• |
Stainless steel pump with silicon-carbide seal |
| J• |
Heavy-duty removable casters for fixed location or portability |
| K• |
Powder-coated finish |
| L• |
NFPA 79 and UL labeled electrical sub-panel (not shown) |
|
| |
 |
| |
| The unique Duratherm heating canister, available in both brass or stainless steel design, generates a forced flow path through the heating element for higher velocity and maximum turbulence - increasing heat transfer to improve efficiency and reduce scale build-up that can cause heater burn-out. This unique design offers customers less down time and lower operating costs. |
|
| * Please consult factory for more information. |
|
|
| • |
Alarms |
| • |
All brass pump |
| • |
Closed water circuitry |
| • |
Control options |
| • |
Cooling or chilled circuits |
| • |
Door disconnect switch |
| • |
Emergency "crash" cooling control |
| • |
Flo-director |
| • |
Heat exchangers |
| • |
Heat remover design |
| • |
High/low heater operation (manual or automatic) |
| • |
Manifolds |
| • |
Modulating valves |
| • |
NEMA 4,12, and hazardous area ratings |
| • |
Other voltages, phases, frequencies |
| • |
Pressure regulators |
| • |
Solid state contactors/relays |
| • |
Stainless steel cabinets and components |
| • |
Tanks |
| • |
T.E.F.C. motor |
|
| * Other options available — see literature or consult factory for more information. |
| |
| Features of Standard and Optional Controls |
A variety of controls are available from Mokon to enhance the high performance of our systems. From solid state to microprocessor based, with communication capabilities to PLC type controls, Mokon can provide the type of control package right for your process.
|
| Eurotherm 3216 Series |
The Eurotherm 1/16 DIN (3216) microprocessor controller is operator friendly and easy-to-use. Standard features include a microprocessor PID controller for the highest accuracy in temperature control, a dual LCD display that shows set point and actual fluid temperature, and scrolling text messages that deliver plain language messages to let users know exactly what is happening to the process. There are optional 1/8 or 1/4 DIN controllers available, with high/low deviation alarm, remote set point and retransmission and serial communication. A five-year warranty comes standard with the controller.
Click on the links below for more information on the Eurotherm 3200 Series controllers:
- 3216 Spec Sheet
- 3200 Series Manual |
 |
|
| Custom Controls |
| Mokon’s ability to meet customers’ specific requirements is seen not only in custom system designs, but also in controls. Our engineers can custom design a control package that meets your specific processing needs, from brand name controls, to direct computer/host machine interfacing. All of which can be expected with the same quality and durability that our customers expect from our complete line of temperature control systems. |
|
| |